3 Series E91 335i (N54) TOUR
Screw special tool 11 8 590 into conrod big end.
Press out conrod and piston to cylinder head side.
Important!
Risk of damage to oil spray nozzle.
Preliminary work:
Clamp special tool 11 8 561 in a vice.
Secure piston (1) with conrod to special tool 11 8 561 .
Warning!
Protective goggles must be worn for the next work step.
Warning!
Protective goggles must be worn.
To lever out piston circlip (1), support special tool 11 5 464 on
piston (2).
Lever out piston circlip (1) with special tool 11 5 464 in
direction of arrow.
RA Removing and installing/replacing all pistons (N54)
BMW AG - TIS
23.02.2013 03:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -