3 Series E91 335i (N54) TOUR
Release screws (1).
Tightening torque: 11 65 2AZ
.
Release screws (1).
Tightening torque:11 65 2AZ
.
Remove heat shield (1) in direction of arrow.
Note:
Carefully swing heat shield out in direction of arrow - risk of
damage!
Coolant feed pipe can be removed with heat shield.
Release screws (1).
Place retaining plate (2) on cylinder head cover.
RA Removing and installing/replacing exhaust-gas turbocharger for cylinders 4-6 (N5
BMW AG - TIS
23.02.2013 03:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -