bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing_replacing Pressure Line (N54, N53)|Page 592 > < 4 RA Removing And Installing_replacing Feed Line (N54, N53)|Page 590
Page 1
background image

13 53 334

Removing and installing/replacing pressure
line (N54, N53)

Special tools required:

11 8 610

13 5 020

32 1 270

Warning!

Observe warning on cylinder head cover.

Disconnect battery negative terminal (risk of fire due to short-
circuiting on removal).

Electric fuel pump starts up automatically each time door is
opened!

Carry out installation work on fuel system only with coolant
temperature below 40 

°

C.

Important!

Wear full face guard and protective gloves.

Fuel can emerge spontaneously at high velocity when the
high-pressure line is released!

Important!

Adhere to conditions of absolute cleanliness when working on
the high-pressure fuel system.

Introduced contaminants can cause malfunctions in the
system!

Do not allow any dirt particles or foreign bodies to get
into the system.

Remove all traces of dirt before removing pipes or
individual components.

Use only fluff-free cloths.

RA  Removing and installing/replacing pressure line (N54, N53)

BMW AG - TIS

23.02.2013  04:15

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Removing And Installing_replacing Pressure Line (N54, N53)|Page 592 > < 4 RA Removing And Installing_replacing Feed Line (N54, N53)|Page 590