3 Series E91 335i (N54) TOUR
13 90 500
Replacing tank vent valve (N54)
Necessary preliminary tasks:
•
Check stored fault messages
•
Switch off ignition
•
Remove intake filter housing
Installation location:
The tank vent valve is located at the rear below the intake air
manifold.
Unlock plug (1) and remove.
Unlock hose (2) and detach.
Unlock hose (3) on throttle valve assembly and disconnect.
Detach tank vent valve (4) from holder and remove.
Note:
Read out fault memory of DME control unit.
Now clear the fault memory.
RA Replacing tank vent valve (N54)
BMW AG - TIS
23.02.2013 04:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
