3 Series E91 335i (N54) TOUR
Slide special tool 61 6 100 onto pin (1).
Place special tool 61 6 100 on windscreen (2) and read off
value in degrees on scale.
Note:
LHD vehicles are covered by the scale range of 0 to -10 and
RHD vehicles by the scale range of 0 to +10.
If the specified number in degrees is not correct, the wiper
arm (1) must be bent with the special tool 61 6 110 at the
point shown.
RA Checking/adjusting contact angle of windscreen wiper arms on windscreen
BMW AG - TIS
23.02.2013 16:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
