bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_replacing CD Changer|Page 2744 > < 1 RA Instructions On Setting The Installation Location On The CD Changer|Page 2742
Page 1
background image

65 11 072

Removing and installing/replacing CD
changer

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Note:

Follow instructions for handling fibre optic cables.

Necessary preliminary tasks:

Remove CD magazine

Disconnect battery negative lead

Remove luggage compartment trim on left.

Partially detach left wheel arch cover and press to one side.

Release screw (1). 

Release screws (2) and remove CD changer with bracket (3).

Disconnect associated plug connection and unclip cable guide
from bracket (3).

Installation:

Make sure sheet metal nuts and CD changer are correctly seated.
Bracket fixture must be inserted in side panel.

RA  Removing and installing/replacing CD changer

BMW AG - TIS

23.02.2013  18:08

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing_replacing CD Changer|Page 2744 > < 1 RA Instructions On Setting The Installation Location On The CD Changer|Page 2742