3 Series E91 335xi (N54) TOUR
Release screw (1).
Disconnect hydraulic lines (2) to transmission fluid cooler.
Installation:
Replace sealing rings.
Release nut (1) and bracket from transmission oil lines on oil
sump.
Crank engine at vibration damper in direction of rotation until
screw (1) is visible in opening.
Release all screws of torque converter with special tool
24 1 110 .
Crank engine further and release remaining 5 bolts.
Tightening torque 24 40 1AZ
.
Illustration similar.
Lower transmission and lock with a suitable block (1) between
front axle carrier and oil sump.
RA Removing and installing automatic transmission (6HP19Z) AWD
BMW AG - TIS
23.02.2013 16:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -