3 Series E91 335xi (N54) TOUR
Important!
Keep press-fit areas clean and free of oil and grease.
Wider chamfer (1) of bearing must point to swivel bearing!
Clean new bearing on press-fit area and bearing seat in swivel
bearing.
Align bearing by way of wider chamfer to swivel bearing and draw
in up to stop with special tools 31 2 113 , 22 1 018 ,
33 4 262 and 33 3 261 .
Note:
The bearing can be forced out of the swivel bearing on a press.
Install new circlip (1).
Note:
Make sure circlip (1) is correctly seated.
Draw in wheel hub (1) up to stop with special tools 31 2 113 ,
33 3 268 , 33 3 266 and 33 3 261 .
RA Replacing bearing for front wheel (AWD)
BMW AG - TIS
23.02.2013 17:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
