3 Series E91 335xi (N54) TOUR
VS-42 je
Baugruppe/Group: 61
61 02 03 (015)
weltweit
Datum/Date:
04/2003
Update: 05/2007
Bus diagnosis
All models from E60
Introduction
In the vehicles of today, components and control units are networked by means of data buses. Data buses are
capable of transmitting messages with signals.
The connected control units only read off those messages and signals that are of relevance to their operation.
Most buses are CAN buses (CAN: Controller Area Network). There are several CAN buses with different data
transmission rates in each car.
For example, the PT-CAN has a fast data transmission rate, the K-CAN a slower data transmission rate.
A fibre-optic cable is used for navigation and entertainment: the MOST bus (MOST = "Media Oriented System
Transport")
There is a separate data wire for diagnosis: the diagnosis wire, also known as the "K-wire".
[for more information, please refer to SI Technology (SBT) 61 03 05 144]
The following options are available for locating faults in data buses and in control units:
-
Test module for CAN bus diagnosis in the BMW diagnosis system:
"Bus system analysis"
The test module is called up in the DIS (Diagnosis and Information System) as follows: "Function selection"
button -> Complete vehicle -> Body -> Bus functions -> Bus analysis -> System analysis
-
Checking the terminating resistances:
Checking the terminating resistances can also be important for bus diagnosis.
SBT Bus diagnosis All models from E60
BMW AG - TIS
24.02.2013 11:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -