3 Series E92 316i (N43) COUPE
Note:
Pilot bearing shell for crankshaft is installed at bearing
position 4 or at bearing position 5.
Bearing position for axial alignment can be recognized by
machining stage (1).
Important!
Bearing position for axial alignment on crankshaft must match
bearing position for axial alignment in crankcase.
Insert pilot bearing shell (2) in crankcase.
Production crankshaft identification:
The numbers featured in the illustration denote the crankshaft
main bearing positions 1 to 5.
Production crankshaft identification:
The numbers featured in the illustration denote the bearing shell
classification for the relevant bearing position from 1 to 5.
Depending on the identification on the crankshaft, yellow- or
green-coded bearing shells are installed at the relevant bearing
position.
Crankshaft
identification
Lower crankcase
1 =
Yellow /
2 =
Green /
3 =
Red /
RA Replacing all main crankshaft bearing shells (N43)
BMW AG - TIS
20.01.2013 09:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -