3 Series E92 316i (N43) COUPE
Release screws (1).
Tightening torque: 11 41 1AZ
.
Rotate suction tube (1) of oil pump downwards and pull out.
Installation:
Replace sealing ring on suction tube (1).
Note:
While central bolt is slackened, balancing shafts can be rotated by
hand at ends.
Align balancing shafts in such a way that special tool 11 8 700
can be joined from inlet side to ends of balancing shafts.
Insert hub with central bolt (1).
Installation:
Replace radial seal.
Secure central bolt (1).
Tightening torque: 11 21 1AZ
RA Replacing timing chain (N43)
BMW AG - TIS
20.01.2013 10:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -