3 Series E92 316i (N43) COUPE
11 66 000
Removing and installing/replacing vacuum
pump (N43B16)
Necessary preliminary tasks:
•
Press brake pedal several times to reduce vacuum in brake
booster.
•
Remove equipment wall.
Note:
For purposes of clarity, this work step is shown on the engine after
it has been removed.
Detach vacuum line (1) of brake booster.
Release screws (2).
Remove vacuum pump (3).
Installation:
Replace sealing ring (1).
The drive must be rotated into the correct position prior to
installation.
Note:
For purposes of clarity, this work step is shown without the
cylinder head cover.
Align drive (1) of vacuum pump to groove (2) of exhaust
camshaft.
RA Removing and installing/replacing vacuum pump (N43B16)
BMW AG - TIS
20.01.2013 10:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
