Replacing Luggage Compartment Floor for 3 Series E92 316i (N43) COUPE
Touring only:
Carry over the work step shown symmetrically to the other side of
the vehicle.
Open weld joints in area (1).
Installation:
Weld new components in areas (2) additionally.
Note:
Rear parcel shelf of Saloon and Coupé is shown removed for
purposes of clarity.
Carry over the work step shown symmetrically to the other side of
the vehicle.
Open weld joints in areas (1) and (2).
Note:
Rear parcel shelf of Saloon and Coupé is shown removed for
purposes of clarity.
Carry over the work step shown symmetrically to the other side of
the vehicle.
Open weld joints in area (1).
Installation:
Weld new component in areas (2) additionally.
Open weld joints in area (1).
RA Replacing luggage compartment floor (complete with both inner wheel arch section
BMW AG - TIS
20.01.2013 13:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -