3 Series E92 316i (N43) COUPE
Important!
For following severance cut, do not damage sunroof water
drain hose.
Mark severance cut (1) in accordance with measurement and cut.
Measurement a = approx. 190 mm from roof edge.
Open weld joint in area (1).
Important!
Do not damage sunroof water drain hose (2).
Roughly cut outer and underlying metal panel in areas (1).
Take off door pillar.
Unclip water drain hose for sliding sunroof (1).
Open weld joints in areas (2).
Remove reinforcements (3) and (4).
Installation:
Adjust new components (3) and (4) to fit after lacquer replica
application on body.
Also adjust new A-pillar component to fit.
RA Replacing front left door pillar (front side panel removed)
BMW AG - TIS
20.01.2013 13:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
