bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing Battery Positive Lead (from Luggage Compartment Connector To Engine Bu > < 1 RA General Information On Intelligent Battery Sensor (IBS)
Page 1
background image

61 12 002

Replacing battery positive lead (from battery
to luggage compartment connector)

Important!

Read and comply with notes on handling wiring harnesses
and cables.

Necessary preliminary tasks:

Remove battery

Disconnect plug connection (1) on safety battery terminal (2).

Unclip cap (1) and release nut underneath. Tightening torque 
61 12 1AZ

.

Disconnect battery positive lead (2).

 

Warning!

Risk of short circuits!

During installation, make sure battery positive lead (2) is
correctly screwed and seated on luggage compartment
connector.

RA  Replacing battery positive lead (from battery to luggage compartment connector)

BMW AG - TIS

20.01.2013  15:21

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Replacing Battery Positive Lead (from Luggage Compartment Connector To Engine Bu > < 1 RA General Information On Intelligent Battery Sensor (IBS)