3 Series E92 316i (N43) COUPE
61 31 100
Removing and installing/replacing switch for
longitudinal seat adjustment
Raise release unit (1).
Unclip release unit trim (2) in direction of arrow and feed out of
release unit (1).
Installation:
First feed release unit trim (2) at front into release unit (1), then
clip into place in rear area.
Make sure release unit trim (2) is correctly engaged and seated
on release unit (1).
Disconnect plug connection (1).
Unlock retaining tabs (2) in direction of arrow.
Remove switch for longitudinal seat adjustment (3) in direction of
arrow.
Installation:
Switch for longitudinal seat adjustment (3) must snap audibly
onto release unit trim.
RA Removing and installing/replacing switch for longitudinal seat adjustment
BMW AG - TIS
20.01.2013 15:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
