3 Series E92 316i (N43) COUPE
Cleaning bumper trim:
For cleaning, use a fluff-free disposable cloth or a clean cleaning
cloth.
Clean adhesive area of bumper trim with spirit.
Air drying time at least 1 minute.
Do not grip bonding surface.
Fitting side marker:
Pull off liner* (1) and gently press side marker (2) onto bumper
trim.
Check position and if necessary realign.
Minimum application pressure is achieved by applying firm thumb
pressure in stages over the entire joining surface (hold time
approx. 1 second).
Firm thumb pressure approx. 35 N/cm
2
.
* Liner is the protective film on a new side marker.
RA Removing and installing/replacing front left or right side marker
BMW AG - TIS
20.01.2013 16:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -