3 Series E92 320d (N47) COUPE
11 61 550
Removing and installing air intake manifold
(N47, N47S)
Necessary preliminary tasks:
•
Disconnect battery negative lead.
•
Remove acoustic cover at front.
•
Remove rear acoustic cover.
•
Remove pressure pipe at throttle valve assembly.
•
Disconnect plug connection at throttle actuator.
•
Disconnect plug connection at charge-air pressure sensor.
Unclip hose (1) from retaining fixture.
Unclip battery positive lead (1) from retaining fixture.
Undo bolts in sequence (5 to 1).
Installation:
Tighten bolts in sequence (1 to 5).
Tightening torque: 11 61 1AZ
.
RA Removing and installing air intake manifold (N47, N47S)
BMW AG - TIS
21.01.2013 02:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
