Replacing Control Unit (DME) for 3 Series E92 320i (N46T) COUPE
Unlock fasteners (1) from below and slide upwards approx.
10 mm.
Unlock locks (2) in direction of arrow.
Remove cover (3).
Unlock plug (1) and remove.
Unlock control unit (2) and remove towards top.
Installation:
Replacement:
Note device identification number and coding.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Replacing control unit (DME)
BMW AG - TIS
22.01.2013 12:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -