3 Series E92 320i (N46T) COUPE
51 14 110
Removing and installing/replacing rear model
designation
Important!
The "Instructions for number/letter combination cementing"
serve as the basis for these repair instructions and must be
followed without fail.
Fitting dimensions (E90/E91/E92/E93):
Attach adhesive tape (1) between edge of rear lid (2) and top edge "A". Mark out measurement "B" from top edge
"A" to outer edge of rear lid on adhesive tape (1).
Dimensions:
E90
A = 25.2 mm
B = 49.3 mm
E91
A = 26.6 mm
B = 65.1 mm
E92
A = 21 mm
B = 49.6 mm
E93
A = 20 mm
B = 52.7 mm
Note:
RA Removing and installing/replacing rear model designation
BMW AG - TIS
22.01.2013 16:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -