3 Series E92 320i (N46T) COUPE
51 23 155
Removing and installing/replacing bar for
retaining hook
Necessary preliminary tasks:
•
Remove front bumper
Release screws (1) and clips (3).
Remove intake cover (2).
Release screws (1) on bar (2).
Release catches (1) on cooling air guide (2).
Feed out cooling air guide (2) with bar towards front.
Feed bar out of cooling air guide (2).
RA Removing and installing/replacing bar for retaining hook
BMW AG - TIS
22.01.2013 16:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -