3 Series E92 323i (N52K) COUPE
Release bearing pin (1) from timing chain module on cylinder
head.
Tightening torque 11 31 5AZ
.
Release bearing pin (1) from timing chain module on crankcase.
Tightening torque 11 31 4AZ
.
Important!
Install special tool 11 4 280 to release the central bolts on
the inlet and exhaust adjustment units.
Secure special tool 11 4 283 to cylinder head with bolts (1).
Note:
Fit special tool 11 4 282 underneath on side of inlet camshaft.
Mount special tool 11 4 281 on inlet and exhaust camshafts.
Do not remove special tool 11 4 280 .
Remove inlet and exhaust adjustment unit.
Release bolts (1) from timing chain module on cylinder head.
Tightening torque 11 31 3AZ
.
Remove chain module with timing chain and sprocket wheel
upwards in direction of arrow.
RA Replacing timing chain (N52K)
BMW AG - TIS
23.01.2013 05:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
