3 Series E92 323i (N52K) COUPE
33 32 160
Removing and installing/replacing
compression strut for rear axle carrier
Important!
Observe safety instructions for raising the vehicle
Driving without compression struts is not permitted!
Risk of damage!
The rear axle carrier must be supported at the front if both
compression struts have to be replaced!
Necessary preliminary tasks:
•
Remove underbody cover
Release screw (1).
Tightening torque 33 32 12AZ
.
Unfasten screws (2).
Installation:
Replace screws.
Tightening torque 33 33 2AZ
.
Release screw (4) and remove compression strut (3).
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Tightening torque 33 33 1AZ
.
RA Removing and installing/replacing compression strut for rear axle carrier
BMW AG - TIS
23.01.2013 08:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
