3 Series E92 323i (N52K) COUPE
51 16 260
Removing and installing/replacing front
section of rear console trim
Special tools required:
•
00 9 317
Apply special tool 00 9 317 at side and unclip trim (1) in
upward direction from retaining clips (2).
If necessary, disconnect plug connections and remove trim (1).
Installation:
Clips (2) must not be damaged.
Replacement:
Release screws (1) and remove ashtray/oddments tray (2).
Release screws (3) and remove oddments tray/fresh-air
grille (4).
RA Removing and installing/replacing front section of rear console trim
BMW AG - TIS
23.01.2013 09:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
