3 Series E92 323i (N52K) COUPE
51 33 000
Removing and installing (replacing) power
window unit in left or right front door
Necessary preliminary tasks:
•
Remove door window glass
Lever out cover (1) and release nut (2).
Installation:
Nut is tightened down when door window glass is adjusted.
Tightening torque 51 33 1AZ
.
Release drive cable from clips (1).
Release nut (2) and feed out front power window rail (3).
Release nuts (4 and 5) and feed out rear power window rail.
Installation:
Clip drive cable correctly into clips (1).
Nut (2) must again be correctly covered with adhesive foil.
Tightening torque 51 33 1AZ
.
Replacement:
Release screws (1) and detach flat motor (2).
Tightening torque 67 62 1AZ
.
RA Removing and installing (replacing) power window unit in left or right front doo
BMW AG - TIS
23.01.2013 10:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
