3 Series E92 323i (N52K) COUPE
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
•
Release expansion tank and place to one side
•
Remove alternator drive belt
•
Remove coolant thermostat
Release screws (1) and disconnect plug connection on
compressor.
Disconnect pressure and suction lines.
Installation:
Replace all sealing rings and moisten with refrigerant oil.
Tightening torque 64 52 1AZ
.
Note:
Secure compressor (3) against falling out.
Release screw (1).
Release screws (2).
Tightening torque 64 52 3AZ
.
Remove compressor towards front.
After installation:
•
Evacuate and fill A/C system
•
Assemble engine
•
Fill cooling system, vent and check for leaks.
RA Replacing A/C system compressor (N52K)
BMW AG - TIS
23.01.2013 13:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
