3 Series E92 323i (N52K) COUPE
65 24 020
Removing and installing or replacing blocking
circuit
Necessary preliminary tasks:
•
Remove panel for parcel shelf
•
If necessary, lay rear window shelf sound insulation to one
side
Unlock plug connections (1) and disconnect.
Release screw (2).
Remove blocking circuit (3) from C-pillar.
Installation:
Fit blocking circuit (1) so that screw (2) engages thread (3) and
locating pin (4) engages bore (5).
RA Removing and installing or replacing blocking circuit
BMW AG - TIS
23.01.2013 13:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
