3 Series E92 323i (N52K) COUPE
Installation:
Apply primer to damaged paintwork on side frame.
Removing rivet heads 5 and 6:
Stabilize metal tab with screwdriver (1).
Drive out rivet head with 6 mm punch.
Removing rivet heads 1, 2, 4 and 7:
Special tool 72 1 200 for collecting rivet remnants.
Shank of special tool is flexible and can be adapted to the relevant
body contours.
Note:
Insert butyl in collecting tray to secure rivet remnants against
falling out.
Insert special tool 72 1 200 through bore in body below
retaining point.
RA Removing and installing or replacing left or right head airbag
BMW AG - TIS
23.01.2013 14:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
