3 Series E92 325xi (N52K) COUPE
41 14 511
Replacing complete rear left wheel arch (rear
left side panel removed)
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 14 511).
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
Spot-weld bonding is used on this vehicle. Observe specific
procedure.
Use only approved spot-welding apparatus for repairs!
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
(1) C-pillar reinforcement
-
(2) Wheel arch, outer, rear
-
(3) Support, wheel arch
-
(4) Wheel arch, rear, inner half
-
(5) Support, frame side member
-
(6) Shaped part, B-pillar, outer (not shown)
-
(7) Shaped part, C-pillar, outer (not shown)
-
(8) Shaped part, wheel arch, front (not shown)
-
(9) Shaped part, wheel arch, rear (not shown)
RA Replacing complete rear left wheel arch (rear left side panel removed)
BMW AG - TIS
27.01.2013 04:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -