3 Series E92 325xi (N52K) COUPE
Drill off rivet plate down to rivet shank with a 10 mm twist drill bit.
Important!
Risk of damage to holders and folding pack.
Carefully lever out holders for folding pack with plastic wedge from
body.
Remove gas generator with B-pillar ramp.
Cut off blind rivet shanks down to sheet metal as level as possible.
Deburr remaining rivets with nipper pliers.
RA Removing and installing or replacing left or right head airbag
BMW AG - TIS
27.01.2013 10:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -