3 Series E92 325xi (N53) COUPE
11 00 050
Removing and installing engine (N53)
Special tools required:
•
11 0 000
•
11 7 310
•
13 5 281
•
13 5 282
Important!
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of aluminium screws/bolts are painted blue for
the purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail (risk of damage).
Necessary preliminary tasks:
•
Disconnect battery negative lead.
•
Lift engine hood into assembly position.
•
Drain engine oil.
•
Remove air cleaner housing.
•
Remove fan cowl with electric fan.
•
Remove radiator.
•
Detach all coolant hoses from engine.
•
Remove left and right fresh air duct.
•
Remove intake air manifold.
•
Detach vacuum line from brake booster.
•
Unfasten ignition wiring harness and lay to one side.
•
Unfasten engine wiring harness and lay to one side.
•
Remove exhaust system.
•
Remove transmission.
RA Removing and installing engine (N53)
BMW AG - TIS
27.01.2013 23:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
