3 Series E92 325xi (N53) COUPE
11 13 000
Removing and installing, sealing or replacing
oil sump (N53)
Important!
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of aluminium screws/bolts are painted blue for
the purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail (risk of damage).
Necessary preliminary tasks:
•
Remove engine splash guard.
•
Secure engine in installation position.
•
Lower front axle.
•
Remove vane-type pump of power steering.
Note:
If automatic transmission optional extra installed, lines must be
detached from engine oil sump.
Note:
Sheet metal pan.
Release bolts (3) on transmission.
Detach return hose (2).
Release bolts along line (1).
Tightening torque: 11 13 4AZ
.
Note:
Aluminium pan.
Installation:
Replace aluminium screws.
Tightening torque: 11 13 2AZ
.
If necessary, unfasten screws (4). Remove oil level sensor.
Installation:
Replace all seals.
RA Removing and installing, sealing or replacing oil sump (N53)
BMW AG - TIS
27.01.2013 23:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -