3 Series E92 325xi (N53) COUPE
Release screws (1).
Release cable of nitrogen oxide sensor from cable holder (2).
Release nitrogen oxide sensor (1) with special tool 11 4 260 .
Release plastic nuts (1).
Disconnect plug connection (2) on nitrogen oxide CAN box.
E60 only.
Slacken rear underbody panelling (2) and lift off in direction of
arrow.
All:
Unclip cable of nitrogen oxide sensor (1) from fixtures.
RA Removing and installing/replacing nitrogen oxide sensor (N53)
BMW AG - TIS
28.01.2013 00:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
