3 Series E92 325xi (N53) COUPE
12 14 524
Replacing pulse generator on exhaust
camshaft (N54)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Remove fan cowl
Unlock plug (1) and remove.
Release screw.
Tightening torque 12 14 4AZ
.
Remove pulse generator (2).
Note:
Check stored fault messages.
Now clear the fault memory.
RA Replacing pulse generator on exhaust camshaft (N54)
BMW AG - TIS
28.01.2013 00:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
