3 Series E92 325xi (N53) COUPE
51 12 821
Replacing both holders for rear bumper
Necessary preliminary tasks:
•
Remove rear bumper trim
Note:
The operation is described on the left side; proceed in the same
way for the right side.
E93 only:
Release antenna holders (1 and 2) from holder (3).
Installation:
If necessary, replace faulty antenna holders (1 and 2).
If necessary, disconnect plug connection at trigger transmitter.
Release screws (1 and 2).
Release nut (3) and remove holder (4).
Installation:
Catches (1) must not be damaged or missing.
E90/E91 only:
Catches (2) must not be damaged or missing.
Replacement:
If necessary, remove RDC trigger transmitter.
RA Replacing both holders for rear bumper
BMW AG - TIS
28.01.2013 07:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
