3 Series E92 325xi (N53) COUPE
51 49 000
Removing and installing/replacing panel for
rear lid
Version with emergency release:
Detach handle (1) from clip (2).
Disconnect Bowden cable (3) from handle (1).
Installation:
Guide Bowden cable (3) through clip (2) and connect correctly in
handle (1).
Release clips (1) and remove panel (2).
Installation:
If necessary, replace damaged clips (1).
RA Removing and installing/replacing panel for rear lid
BMW AG - TIS
28.01.2013 09:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
