3 Series E92 325xi (N53) COUPE
Detach backrest cover in marked area.
Detach mounting strip (4) from flexmat.
Carefully pull airbag module (3) with threaded pins out of
backrest frame and feed out between padding (1) and inner
bag (2).
Set down airbag module (3) to one side.
Installation:
Pull inner bag (1) fully over airbag module and threaded pins.
Feed in mounting strip (2) of inner bag (1) through backrest
frame.
Insert threaded pins into backrest frame and secure with new
nuts.
No inner bag material is permitted to project through the hole in
the inner frame.
Install nuts and tighten down.
Tightening torques 72 12 02AZ
.
Installation:
Inner bag must be between airbag module and backrest frame!
Engage mounting strip (1) of inner bag in flexmat.
Position inner bag (2) smoothly over backrest frame.
Engage backrest cover (3) in backrest frame.
RA Replacing backrest cover for left or right front seat (normal / manual)
BMW AG - TIS
28.01.2013 10:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
