3 Series E92 325xi (N53) COUPE
Pull cover trim (1) up and out of lower clips.
Installation:
Make sure cover trim (1) is correctly inserted into lower clips.
If necessary, replace faulty clips.
Note:
Twist cover trim (1) out of lower retaining lug during removal.
Cover trim (1) must be replaced if retaining lugs are faulty.
Remove cover strip (1) from backrest frame.
Note:
Cover strip (1) must be replaced if retaining lugs are faulty.
RA Removing and installing complete centre armrest for rear seat backrest (through-
BMW AG - TIS
29.01.2013 18:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
