3 Series E92 328i (N51) COUPE
Connect compressed air line to compressed air valve.
Blow fuel back into tank with a short blast of compressed air (max.
3 bar).
Unclip plug connection (1) from holder (2) and disconnect.
Unclip wiring harnesses from holder (2) and connector strip (3).
Disconnect holder (2) from injection pipe.
Detach connector strip (3) in direction of arrow.
Important!
When releasing and tightening down fuel line (1), it is
absolutely essential to grip fuel rail (2)!
Release fuel line (1).
Tightening torque 13 53 11AZ
.
Seal fuel hose with special tool 32 1 270 .
Note:
Use only clean plugs.
RA Replacing complete injection pipe (N51)
BMW AG - TIS
23.02.2013 11:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
