3 Series E92 328i (N51) COUPE
16 14 070
Removing and installing/replacing vent hose
with strainer for carbon canister
Necessary preliminary tasks:
•
Remove cover for carbon canister
•
Remove rear left wheel arch cover
Release quick-release coupling (1) and detach vent hose.
Carefully press vent hose out of clamps (2).
Installation:
Quick-release coupling (1) must audibly snap into place.
Check locking of quick-release coupling by pulling, do not actuate
release element in the process.
RA Removing and installing/replacing vent hose with strainer for carbon canister
BMW AG - TIS
23.02.2013 12:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -