3 Series E92 328i (N52K) COUPE
Install bearing shell (1) with tip facing down (see arrow) in
cylinder head.
Install bearing shell (2) with tip facing up in bearing cap.
Note:
All bearing caps (1 and 2) of eccentric shaft are marked with
numbers from 1 to 6 (1 for 1st cylinder to 6 for 6th cylinder).
Bearing cap 6 (1) is provided with a stop.
Insert eccentric shaft.
Adjust eccentric shaft on dihedron to minimum stroke.
Fit all bearing caps (1 and 2).
Insert all screws.
Tightening torque 11 12 7AZ
.
Assemble engine.
RA Removing and installing/replacing eccentric shaft (N52K)
BMW AG - TIS
02.02.2013 14:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -