3 Series E92 328i (N52K) COUPE
22 31 001
Replacing rubber mount for transmission
mounting
Necessary preliminary tasks:
•
Remove rear underbody protection.
•
Support transmission with lifter.
Remove screws and nuts.
Remove transmission cross-member (1).
Remove rubber mount from transmission cross-member.
Tightening torque 22 32 3AZ/4AZ
.
RA Replacing rubber mount for transmission mounting
BMW AG - TIS
02.02.2013 16:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -