3 Series E92 328i (N52K) COUPE
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove underbody protection with bracket at front and rear.
•
Remove complete exhaust system
•
Remove heat shields
•
Support engine with lifter when removing transmission
Release screws (1).
Remove bracket and heat shield.
Unclip lines (2).
Remove bracket (3).
Disconnect plug connector (1).
Release screws (2).
Remove retaining plate (3).
Tightening torque 24 00 2AZ
.
Release aluminium screws on right next to cable retaining plate
with special tool 00 9 010 .
Blue aluminium screws/bolts must be replaced.
Tightening torque 24 00 2AZ
.
RA Removing and installing automatic transmission (GA6L45R)
BMW AG - TIS
02.02.2013 16:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -