3 Series E92 328i (N52K) COUPE
Lever out restraining hook (2) with a suitable screwdriver.
Restraining hook (2) must detach from stop (1) of adjusting
spring.
Completely unscrew one wheel stud on each rear wheel.
Installation:
Tightening torque 36 10 1AZ
.
Turn wheel until adjustment screw is visible in tapped hole.
Turn adjusting screw with a screwdriver until the wheel is no
longer able to turn.
Then unfasten the adjusting screw 8 notches.
Unlock adjuster unit (ASZE).
Lever out restraining hook (2) with a suitable screwdriver.
Restraining hook (2) must detach from stop (1) of adjusting
spring.
Important!
Follow instructions for Brake testing on test stand.
RA Adjusting handbrake
BMW AG - TIS
02.02.2013 19:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -