3 Series E92 328xi (N51) COUPE
11 00
Removing and installing/replacing acoustic
cover (N52/N52K)
Important!
Aluminium-magnesium materials.
No steel screws/bolts may be used due to the threat of
electrochemical corrosion.
A magnesium crankcase requires aluminium screws/bolts
exclusively.
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of aluminium screws/bolts are painted blue for
the purposes of reliable identification.
Jointing torque and angle of rotation must be observed
without fail
(risk of damage).
Unfasten screws (1 and 3).
If necessary, release oil cap (2) in direction of arrow.
Lift off acoustic cover (4)
Necessary preliminary tasks:
•
Remove microfilter housing
•
Remove tension strut
Release screws.
Tightening torque 11 12 7AZ
.
Remove acoustic cover.
Note:
For purposes of improved clarity, illustration and descriptions
shows wiring harness and tension strut removed.
RA Removing and installing/replacing acoustic cover (N52/N52K)
BMW AG - TIS
04.02.2013 00:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -