3 Series E92 328xi (N51) COUPE
Important!
Fit new cylinder head screws.
Do not wash off bolt coating.
There must not be any coolant, water or oil present in the
pocket holes (risk of corrosion and cracking).
Release screws (1).
Unclip timing chain module (2) at junction (3) and remove
towards top.
Do not allow timing chain to drop down.
Installation:
Only during assembly is the timing chain lifted out with a hook.
Unfasten screws (2).
Remove eccentric shaft sensor (1) towards front.
Release screw (1).
Remove magnet wheel (2) towards front.
Important!
Magnet wheel (2) is extremely magnetic.
RA Removing and installing/sealing cylinder head (N51)
BMW AG - TIS
04.02.2013 00:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -