3 Series E92 328xi (N51) COUPE
Installation:
Contact surfaces (1) must be clean and oil-free.
Clean if necessary.
Lift out intermediate levers (2).
Intermediate levers (2) set out in special tool 11 4 481 in order.
Installation:
Mixing up the intermediate levers may cause the engine to
demonstrate rpm fluctuations.
Installation:
Contact surfaces (1) must be clean and oil-free.
Clean if necessary.
All intermediate levers (1) are classified.
Reinstall intermediate levers which have already been used in the
same positions.
Installation:
Before reinstalling the intermediate levers, make sure the roller
cam followers are correctly positioned (risk of damage).
Install intermediate levers (2).
RA Removing and installing/replacing intermediate lever (N51)
BMW AG - TIS
04.02.2013 00:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
