3 Series E92 328xi (N51) COUPE
Insert adhesive (Loctite 4204) into bore (1) for sensor pin until
adhesive emerges from bore.
If necessary, remove emerging adhesive with a fluff-free cloth.
Bore (1), see also Fig. 1705-82.
Note:
•
Adhesive application time: 20 secs.!
•
Components to be glued must be at room temperature!
•
Use only Loctite 4204 as adhesive.
•
Loctite 4204 adhesive is available from any good retailer.
•
Read and comply with Loctite's Technical Specifications.
Insert sensor (1) into radiator bores until it snaps audibly into
place. Do not tilt sensor in so doing.
Note:
•
Do not expose the sensor to movements or vibrations during
the first 30 minutes.
•
Final strength is achieved after approx. 24 hours.
Note:
Read out fault memory of DME control unit.
Clear fault memory
RA Replacing radiator sensor (N51)
BMW AG - TIS
04.02.2013 01:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -