3 Series E92 328xi (N51) COUPE
Note:
If the cutting line is not marked by a punch mark in the pipe,
determine the cutting line by means of the pipe length on the new
front muffler.
Carry over cutting line to faulty front silencer (3) and mark out.
Cut exhaust pipes at marked points with special tool 00 2 210
and deburr.
Release bolt and remove bracket (1).
Tightening torque 18 20 2AZ
.
Unfasten screw connection.
Installation:
Tightening torque 18 20 3AZ
.
RA Replacing front muffler (N51)
BMW AG - TIS
04.02.2013 02:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
