3 Series E92 328xi (N51) COUPE
Replacing rubber mount:
Remove both compression struts.
Using a press and special tools 31 3 031 and 31 3 032 ,
press rubber mount out of compression strut.
Note:
Special tool 31 3 031 must be exactly flush with rubber mount
bushing.
Installation:
Keep rubber mount and bushing in compression strut clean and
free from grease.
Align rubber mount by way of opening (1) in bushing to
marking (2) on compression strut and press in. The
deviation (A) must not exceed
±
5
°
.
Installation:
Protrusion (A) equally large.
RA Replacing rubber mounts on both compression struts (AWD)
BMW AG - TIS
04.02.2013 03:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -